WTware v.5.3.11


[init] WTware init v.5.3.11/RK3066 (c) 2003-2015 WTware http://www.wtware.com

[init] Run /sbin/loader.

[init] Ok, PID 70.

[loader] WTware/RK3066 loader v.5.3.11.

[loader] [0] partition 'misc'.

[loader] [1] partition 'kernel'.

[loader] [2] partition 'boot'.

[loader] [3] partition 'recovery'.

[loader] [4] partition 'backup'.

[loader] [5] partition 'cache'.

[loader] [6] partition 'userdata'.

[loader] [7] partition 'kpanic'.

[loader] [8] partition 'system'. Store data here.

[loader] [9] partition 'user'.

[loader] Loader version 1.24.

[loader] Before modesetting:

[loader] xres 1280, xres_virtual 1280, yres 720, yres_virtual 720, bits_per_pixel 16

[loader] VSI.pixclock 0, sync 00000000

[loader] left_margin 220, right_margin 110, hsync_len 40

[loader] upper_margin 20, lower_margin 5, vsync_len 5

[loader] Current HDMI mode is '1280x720p-60'.

[loader] Try to change video mode.

[loader] Video mode looks like 1920x1080.

[loader] dhcp: 328 bytes from 192.168.120.1.

00000000:000001340000000000110000c0a87801ffffffff004300440134000002010600  ...4.........x......C.D.4......

00000020:67458b6b0000000000000000c0a8780cc0a878010000000030473535ab510000  gE.k..........x...x.....0G55.Q..

00000040:0000000000000000000000000000000000000000000000000000000000000000  ................................

00000060:0000000000000000000000000000000000000000000000000000000000000000  ................................

[loader] dhcp: 328 bytes from 192.168.120.1.

00000000:000001340000000000110000c0a87801ffffffff004300440134000002010600  ...4.........x......C.D.4......

00000020:67458b6b0000000000000000c0a8780cc0a878010000000030473535ab510000  gE.k..........x...x.....0G55.Q..

00000040:0000000000000000000000000000000000000000000000000000000000000000  ................................

00000060:0000000000000000000000000000000000000000000000000000000000000000  ................................

[loader] dhcp: server address 192.168.120.1.

[loader] dhcp: 192.168.120.12/255.255.255.0.

[loader] dhcp: default gateway 192.168.120.1.

[loader] dhcp: DNS 192.168.120.1.

[loader] dhcp: TFTP from siaddr 192.168.120.1.

[loader] dhcp: TFTP 192.168.120.1.

[loader] dhcp: boot file (header) wtware.pxe.

[loader] TFTP binary "", configs prefix "", using "/" slash.

[init] Run /sbin/kotenok.

[init] Ok, PID 89.

WTware v.5.3.11/RK3066 supervisor.

Send broadcast WTCU discover.

WTC listener is active.

WTC broadcast listener is active.

HTTPd listener is active.

[KERNEL] [    0.000000] Initializing cgroup subsys cpu

[KERNEL] [    0.000000] Linux version 3.0.36+ (aaron@develop-server) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #12 SMP PREEMPT Tue Feb 11 15:37:33 CST 2014

[KERNEL] [    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d

[KERNEL] [    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache

[KERNEL] [    0.000000] Machine: RK30board

[KERNEL] [    0.000000] memory reserve: Memory(base:0x8f000000 size:120M) reserved for 

[KERNEL] [    0.000000] memory reserve: Memory(base:0x8e500000 size:11M) reserved for 

[KERNEL] [    0.000000] memory reserve: Memory(base:0x8df00000 size:6M) reserved for 

[KERNEL] [    0.000000] memory reserve: Total reserved 137M

[KERNEL] [    0.000000] Memory policy: ECC disabled, Data cache writeback

[KERNEL] [    0.000000] bootconsole [earlycon0] enabled

[KERNEL] [    0.000000] CPU SRAM: copied sram code from c0c34000 to fef00100 - fef021c8

[KERNEL] [    0.000000] CPU SRAM: copied sram data from c0c360c8 to fef021c8 - fef02948

[KERNEL] [    0.000000] sram_log:      4q ?&     :     4q ?)     !?, # 0q    *!  ! 3q   @      3q 

[KERNEL] [    0.000000] CLKDATA_MSG: pll_flag = 0x00

[KERNEL] [    0.000000] L310 cache controller enabled

[KERNEL] [    0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B

[KERNEL] [    0.000000] DDR DEBUG: version 1.00 20130712 

[KERNEL] [    0.000000] DDR DEBUG: DDR3 Device

[KERNEL] [    0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Total Capability=2048MB

[KERNEL] [    0.000000] DDR DEBUG: init success!!! freq=348MHz

[KERNEL] [    0.000000] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=1 extra clock, DGPS=90

[KERNEL] [    0.000000] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=1 extra clock, DGPS=90

[KERNEL] [    0.000000] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=1 extra clock, DGPS=90

[KERNEL] [    0.000000] DDR DEBUG: DTONE=0x3, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=1 extra clock, DGPS=90

[KERNEL] [    0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0

[KERNEL] [    0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb

[KERNEL] [    0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2

[KERNEL] [    0.000000] On node 0 totalpages: 489216

[KERNEL] [    0.000000] free_area_init_node: node 0, pgdat c0c311a0, node_mem_map c2780000

[KERNEL] [    0.000000]   Normal zone: 1744 pages used for memmap

[KERNEL] [    0.000000]   Normal zone: 0 pages reserved

[KERNEL] [    0.000000]   Normal zone: 186416 pages, LIFO batch:31

[KERNEL] [    0.000000]   HighMem zone: 2352 pages used for memmap

[KERNEL] [    0.000000]   HighMem zone: 298704 pages, LIFO batch:31

[KERNEL] [    0.000000] PERCPU: Embedded 7 pages/cpu @c378f000 s6976 r8192 d13504 u32768

[KERNEL] [    0.000000] pcpu-alloc: s6976 r8192 d13504 u32768 alloc=8*4096

[KERNEL] [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 

[KERNEL] [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 485120

[KERNEL] [    0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00780000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00008000@0x00004000(kernel),0x00008000@0x0000C000(boot),0x000C000@0x00014000(recovery),0x00100000@0x00020000(backup),0x00040000@0x00120000(cache),0x00200000@0x00160000(userdata),0x00002000@0x00360000(kpanic),0x00100000@0x00362000(system),-@0x00462000(user) bootver=2013-06-20#1.24 firmware_ver=4.1.1

[KERNEL] [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

[KERNEL] [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[KERNEL] [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[KERNEL] [    0.000000] Memory: 735MB 1176MB = 1911MB total

[KERNEL] [    0.000000] Memory: 1912500k/1912500k available, 184652k reserved, 1204224K highmem

[KERNEL] [    0.000000] Virtual kernel memory layout:

[KERNEL] [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)

[KERNEL] [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)

[KERNEL] [    0.000000]     DMA     : 0xff600000 - 0xffe00000   (   8 MB)

[KERNEL] [    0.000000]     vmalloc : 0xf7000000 - 0xfe800000   ( 120 MB)

[KERNEL] [    0.000000]     lowmem  : 0xc0000000 - 0xf6800000   ( 872 MB)

[KERNEL] [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)

[KERNEL] [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)

[KERNEL] [    0.000000]       .init : 0xc0408000 - 0xc0513000   (1068 kB)

[KERNEL] [    0.000000]       .text : 0xc0513000 - 0xc0bc795c   (6867 kB)

[KERNEL] [    0.000000]       .data : 0xc0bc8000 - 0xc0c33008   ( 429 kB)

[KERNEL] [    0.000000]        .bss : 0xc0c37024 - 0xc16dd0b8   (10905 kB)

[KERNEL] [    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[KERNEL] [    0.000000] Preemptible hierarchical RCU implementation.

[KERNEL] [    0.000000] NR_IRQS:352

[KERNEL] [    0.000000] rk30_gpio_init: 128 gpio irqs in 4 banks

[KERNEL] [    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms

[KERNEL] [    0.000000] rk_timer: version 1.2

[KERNEL] [    0.000000] Console: colour dummy device 80x30

[KERNEL] [    0.008762] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)

[KERNEL] [    0.017930] pid_max: default: 32768 minimum: 301

[KERNEL] [    0.023258] Mount-cache hash table entries: 512

[KERNEL] [    0.028802] Initializing cgroup subsys debug

[KERNEL] [    0.033581] Initializing cgroup subsys cpuacct

[KERNEL] [    0.038571] Initializing cgroup subsys freezer

[KERNEL] [    0.043555] CPU: Testing write buffer coherency: ok

[KERNEL] [    0.129745] CPU1: Booted secondary processor

[KERNEL] [    0.169738] CPU2: Booted secondary processor

[KERNEL] [    0.209736] CPU3: Booted secondary processor

[KERNEL] [    0.209763] Brought up 4 CPUs

[KERNEL] [    0.227426] SMP: Total of 4 processors activated (6525.87 BogoMIPS).

[KERNEL] [    0.234800] devtmpfs: initialized

[KERNEL] [    0.244480] NET: Registered protocol family 16

[KERNEL] [    0.249553] last_log: 0xed900000 map to 0xf7004000 and copy to 0xc0c3b1a0 (version 2.1)

[KERNEL] [    0.272448] DVFS MSG:	AVS Value(index=0): 192 191 191 192 193 192 191 193 192 190 

[KERNEL] [    0.291660] lcdc0 is used as external display device contoller!

[KERNEL] [    0.298269] lcdc1 is used as primary display device controller!

[KERNEL] [    0.405117] rk29sdk_wifi_bt_gpio_control_init: init finished

[KERNEL] [    0.412673] console [ttyFIQ0] enabled, bootconsole disabled

[KERNEL] [    0.421728] Registered FIQ tty driver ed83dcc0

[KERNEL] [    0.433547] bio: create slab  at 0

[KERNEL] [    0.437936] SCSI subsystem initialized

[KERNEL] [    0.438141] usbcore: registered new interface driver usbfs

[KERNEL] [    0.438246] usbcore: registered new interface driver hub

[KERNEL] [    0.452506] usbcore: registered new device driver usb

[KERNEL] [    0.452733] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter

[KERNEL] [    0.452959] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter

[KERNEL] [    0.453142] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter

[KERNEL] [    0.453268] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter

[KERNEL] [    0.453551] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter

[KERNEL] [    0.484087] rk30-adc rk30-adc: rk30 adc: driver initialized

[KERNEL] [    0.484350] Advanced Linux Sound Architecture Driver Version 1.0.24.

[KERNEL] [    0.484764] Bluetooth: Core ver 2.16

[KERNEL] [    0.484825] NET: Registered protocol family 31

[KERNEL] [    0.484858] Bluetooth: HCI device and connection manager initialized

[KERNEL] [    0.484903] Bluetooth: HCI socket layer initialized

[KERNEL] [    0.484937] Bluetooth: L2CAP socket layer initialized

[KERNEL] [    0.484983] Bluetooth: SCO socket layer initialized

[KERNEL] [    0.486001] rk fb probe ok!

[KERNEL] [    0.491469] act8846_set_init,line=17

[KERNEL] [    0.491499] act8846_set_init:g_pmic_type=3

[KERNEL] [    0.493274] act8846_set_init  act_dcdc1 =1200000mV end

[KERNEL] [    0.495146] act8846_set_init  vdd_core =1000000mV end

[KERNEL] [    0.497014] act8846_set_init  vdd_cpu =1000000mV end

[KERNEL] [    0.498882] act8846_set_init  act_dcdc4 =3300000mV end

[KERNEL] [    0.500122] act8846_set_init  act_ldo1 =1000000mV end

[KERNEL] [    0.501892] act8846_set_init  act_ldo2 =1200000mV end

[KERNEL] [    0.503661] act8846_set_init  act_ldo3 =1800000mV end

[KERNEL] [    0.505430] act8846_set_init  act_ldo4 =3300000mV end

[KERNEL] [    0.507198] act8846_set_init  act_ldo5 =3300000mV end

[KERNEL] [    0.508333] act8846_set_init  act_ldo6 =3300000mV end

[KERNEL] [    0.509469] act8846_set_init  act_ldo7 =1800000mV end

[KERNEL] [    0.511237] act8846_set_init  act_ldo8 =2800000mV end

[KERNEL] [    0.511280] act8846_set_init,line=78 END

[KERNEL] [    0.511343] i2c-core: driver [act8846] using legacy suspend method

[KERNEL] [    0.511384] i2c-core: driver [act8846] using legacy resume method

[KERNEL] [    0.511453] rk1000_control_probe

[KERNEL] [    0.536407] rk1000_control_probe ok

[KERNEL] [    0.536481] Switching to clocksource rk_timer

[KERNEL] [    0.539177] Switched to NOHz mode on CPU #0

[KERNEL] [    0.539772] Switched to NOHz mode on CPU #3

[KERNEL] [    0.539793] Switched to NOHz mode on CPU #2

[KERNEL] [    0.539804] Switched to NOHz mode on CPU #1

[KERNEL] [    0.543139] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xf709c000

[KERNEL] [    0.543218] fb0:win0

[KERNEL] [    0.543223] fb1:win1

[KERNEL] [    0.543228] fb2:win2

[KERNEL] [    0.543313] rk3188 lcdc1 clk enable...

[KERNEL] [    0.543363] rk3188 lcdc1 clk disable...

[KERNEL] [    0.567209] fb0:phy:8e500000>>vir:f8000000>>len:0xb00000

[KERNEL] [    0.567460] rk_fb_register>>>>>fb0

[KERNEL] [    0.567744] rk_fb_register>>>>>fb1

[KERNEL] [    0.581740] rk3188 lcdc1 probe ok!

[KERNEL] [    0.581822] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xf70a8000

[KERNEL] [    0.581886] fb0:win0

[KERNEL] [    0.581891] fb1:win1

[KERNEL] [    0.581896] fb2:win2

[KERNEL] [    0.581986] rk3188 lcdc0 clk enable...

[KERNEL] [    0.582030] rk3188 lcdc0 clk disable...

[KERNEL] [    0.582063] fb2:phy:8e500000>>vir:f8000000>>len:0xb00000

[KERNEL] [    0.582312] rk_fb_register>>>>>fb2

[KERNEL] [    0.582596] rk_fb_register>>>>>fb3

[KERNEL] [    0.582623] rk3188 lcdc0 probe ok!

[KERNEL] [    0.645206] IT66121 probe success.

[KERNEL] [    0.651193] NET: Registered protocol family 2

[KERNEL] [    0.651328] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[KERNEL] [    0.651696] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[KERNEL] [    0.653563] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)

[KERNEL] [    0.654654] TCP: Hash tables configured (established 131072 bind 65536)

[KERNEL] [    0.654697] TCP reno registered

[KERNEL] [    0.654725] UDP hash table entries: 512 (order: 2, 16384 bytes)

[KERNEL] [    0.654790] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[KERNEL] [    0.655093] NET: Registered protocol family 1

[KERNEL] [    0.655315] RK29 Backlight Driver Initialized.

[KERNEL] [    0.655514] Unpacking initramfs...

[KERNEL] [    0.773928] cfg80211: Calling CRDA to update world regulatory domain

[KERNEL] [    0.871311] Freeing initrd memory: 7680K

[KERNEL] [    0.871412] PMU: registered new PMU device of type 0

[KERNEL] [    0.871525] DVFS MSG: core: dvfs_adjust_table_lmtvolt get leakage_level = 4

[KERNEL] [    0.871574] 		adjust table freq=1608000 KHz, index=1350000 mV to index=1300000 mV

[KERNEL] [    0.871627] DVFS MSG: aclk_gpu: dvfs_adjust_table_lmtvolt get leakage_level = 4

[KERNEL] [    0.882911] ******** Show Sink Info ********

[KERNEL] [    0.882943] Support video mode: 

[KERNEL] [    0.882967] 	1920x1080p@60Hz.

[KERNEL] [    0.882989] 	1920x1080p@50Hz.

[KERNEL] [    0.883010] 	1280x720p@60Hz.

[KERNEL] [    0.883030] 	1280x720p@50Hz.

[KERNEL] [    0.883051] 	720x576p@50Hz.

[KERNEL] [    0.883071] 	720x480p@60Hz.

[KERNEL] [    0.883091] Support audio type: LPCM

[KERNEL] [    0.883115] Support audio sample rate: 

[KERNEL] [    0.883141] 	32000

[KERNEL] [    0.883156] 	44100

[KERNEL] [    0.883171] 	48000

[KERNEL] [    0.883186] Support audio word lenght: 

[KERNEL] [    0.883212] 	16bit

[KERNEL] [    0.883227] 	20bit

[KERNEL] [    0.883242] 	24bit

[KERNEL] [    0.883257] ******** Show Sink Info ********

[KERNEL] [    0.883311] rk3188 lcdc1 clk enable...

[KERNEL] [    0.883349] lcdc1: dclk:74250000>>fps:60 

[KERNEL] [    0.883381] rk30-lcdc rk30-lcdc.1: rk3188_load_screen for lcdc1 ok!

[KERNEL] [    0.883428] lcdc1: dclk:74250000>>fps:60 

[KERNEL] [    0.883457] rk30-lcdc rk30-lcdc.1: rk3188_load_screen for lcdc1 ok!

[KERNEL] [    0.883500] lcdc1 wakeup from standby!

[KERNEL] [    0.883528] lcdc1 win0 open,atv layer:1

[KERNEL] [    0.952429] no layer of lcdc1 is used,go to standby!

[KERNEL] [    0.952483] rk3188 lcdc1 clk disable...

[KERNEL] [    0.952512] lcdc1 win0 closed,atv layer:0

[KERNEL] [    0.998518] rk3188 cpufreq version 2.1, suspend freq 816 MHz

[KERNEL] [    0.999045] Loaded driver for PL330 DMAC-1 rk29-pl330

[KERNEL] [    0.999084] 	DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12

[KERNEL] [    0.999275] Loaded driver for PL330 DMAC-2 rk29-pl330

[KERNEL] [    0.999312] 	DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14

[KERNEL] [    1.026737] highmem bounce pool size: 64 pages

[KERNEL] [    1.026911] ashmem: initialized

[KERNEL] [    1.036124] fuse init (API version 7.16)

[KERNEL] [    1.040821] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

[KERNEL] [    1.040872] io scheduler noop registered

[KERNEL] [    1.040906] io scheduler deadline registered

[KERNEL] [    1.040971] io scheduler cfq registered (default)

[KERNEL] [    1.061266] rga: Driver loaded succesfully

[KERNEL] [    1.061390] rk3188 lcdc0 clk enable...

[KERNEL] [    1.061430] lcdc0: dclk:74250000>>fps:60 

[KERNEL] [    1.061460] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!

[KERNEL] [    1.061915] lcdc0: dclk:27000000>>fps:60 

[KERNEL] [    1.064191] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!

[KERNEL] [    1.064226] lcdc0: dclk:27000000>>fps:60 

[KERNEL] [    1.066493] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!

[KERNEL] [    1.066527] lcdc0 wakeup from standby!

[KERNEL] [    1.066563] lcdc0 win0 open,atv layer:1

[KERNEL] [    1.066593] rk1000_tv ver 2.0 probe ok

[KERNEL] [    1.066768] rk_serial.c v1.3 2012-12-14

[KERNEL] [    1.066844] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0

[KERNEL] [    1.246550] rk_serial rk_serial.0: membase 0xf70c0000

[KERNEL] [    1.246610] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3

[KERNEL] [    1.379493] ******** Show Sink Info ********

[KERNEL] [    1.379517] Support video mode: 

[KERNEL] [    1.379542] 	1920x1080p@60Hz.

[KERNEL] [    1.379557] 	1920x1080p@50Hz.

[KERNEL] [    1.379572] 	1280x720p@60Hz.

[KERNEL] [    1.379587] 	1280x720p@50Hz.

[KERNEL] [    1.379601] 	720x576p@50Hz.

[KERNEL] [    1.379616] 	720x480p@60Hz.

[KERNEL] [    1.379632] Support audio type: LPCM

[KERNEL] [    1.379649] Support audio sample rate: 

[KERNEL] [    1.379668] 	32000

[KERNEL] [    1.379678] 	44100

[KERNEL] [    1.379689] 	48000

[KERNEL] [    1.379700] Support audio word lenght: 

[KERNEL] [    1.379718] 	16bit

[KERNEL] [    1.379729] 	20bit

[KERNEL] [    1.379739] 	24bit

[KERNEL] [    1.379750] ******** Show Sink Info ********

[KERNEL] [    1.379776] rk3188 lcdc1 clk enable...

[KERNEL] [    1.379799] lcdc1: dclk:74250000>>fps:60 

[KERNEL] [    1.379822] rk30-lcdc rk30-lcdc.1: rk3188_load_screen for lcdc1 ok!

[KERNEL] [    1.379855] lcdc1: dclk:74250000>>fps:60 

[KERNEL] [    1.379875] rk30-lcdc rk30-lcdc.1: rk3188_load_screen for lcdc1 ok!

[KERNEL] [    1.379907] lcdc1 wakeup from standby!

[KERNEL] [    1.379928] lcdc1 win0 open,atv layer:1

[KERNEL] [    1.406548] rk_serial rk_serial.3: membase 0xf70c8000

[KERNEL] [    1.406746] Rockchip ion module(version: 1.0) is successfully loaded

[KERNEL] [    1.408222] loop: module loaded

[KERNEL] [    1.408264] Android kernel panic handler initialized (bind=kpanic)

[KERNEL] [    2.417061] PPP generic driver version 2.4.2

[KERNEL] [    2.417179] PPP Deflate Compression module registered

[KERNEL] [    2.417205] PPP BSD Compression module registered

[KERNEL] [    2.429734] PPP MPPE Compression module registered

[KERNEL] [    2.429763] NET: Registered protocol family 24

[KERNEL] [    2.429829] usbcore: registered new interface driver asix

[KERNEL] [    2.429875] usbcore: registered new interface driver cdc_ether

[KERNEL] [    2.429920] usbcore: registered new interface driver dm9620

[KERNEL] [    2.429965] usbcore: registered new interface driver SR9700_android

[KERNEL] [    2.430019] usbcore: registered new interface driver net1080

[KERNEL] [    2.430064] usbcore: registered new interface driver cdc_subset

[KERNEL] [    2.430110] usbcore: registered new interface driver zaurus

[KERNEL] [    2.430144] cdc_ncm: 04-Aug-2011

[KERNEL] [    2.430179] usbcore: registered new interface driver cdc_ncm

[KERNEL] [    2.430238] usbcore: registered new interface driver CoreChips

[KERNEL] [    2.430267] Rockchip WiFi SYS interface (V1.00) ... 

[KERNEL] [    2.430312] Initializing USB Mass Storage driver...

[KERNEL] [    2.430360] usbcore: registered new interface driver usb-storage

[KERNEL] [    2.430389] USB Mass Storage support registered.

[KERNEL] [    2.430466] usbcore: registered new interface driver usbserial

[KERNEL] [    2.430511] USB Serial support registered for generic

[KERNEL] [    2.430559] usbcore: registered new interface driver usbserial_generic

[KERNEL] [    2.430592] usbserial: USB Serial Driver core

[KERNEL] [    2.430627] USB Serial support registered for GSM modem (1-port)

[KERNEL] [    2.430676] usbcore: registered new interface driver option

[KERNEL] [    2.430706] option: v0.7.2:USB Driver for GSM modems

[KERNEL] [    2.430752] USB Serial support registered for usi-modem

[KERNEL] [    2.430795] usbcore: registered new interface driver usi-modem

[KERNEL] [    2.652540] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode

[KERNEL] [    2.652576] usb20_otg usb20_otg: DWC OTG Controller

[KERNEL] [    2.652687] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1

[KERNEL] [    2.652741] usb20_otg usb20_otg: irq 48, io mem 0x00000000

[KERNEL] [    2.652791] DWC_OTG: Init: Port Power? op_state=1

[KERNEL] [    2.652814] DWC_OTG: Init: Power Port (0)

[KERNEL] [    2.652877] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[KERNEL] [    2.652912] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[KERNEL] [    2.652948] usb usb1: Product: DWC OTG Controller

[KERNEL] [    2.652973] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd

[KERNEL] [    2.653002] usb usb1: SerialNumber: usb20_otg

[KERNEL] [    2.653260] hub 1-0:1.0: USB hub found

[KERNEL] [    2.653288] hub 1-0:1.0: 1 port detected

[KERNEL] [    2.655832] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xf7180000

[KERNEL] [    2.866555] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode

[KERNEL] [    2.866596] usb20_host usb20_host: DWC OTG Controller

[KERNEL] [    2.866649] usb20_host usb20_host: new USB bus registered, assigned bus number 2

[KERNEL] [    2.866708] usb20_host usb20_host: irq 49, io mem 0x00000000

[KERNEL] [    2.866774] DWC_OTG: Init: Port Power? op_state=1

[KERNEL] [    2.866801] DWC_OTG: Init: Power Port (0)

[KERNEL] [    2.866851] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

[KERNEL] [    2.866888] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[KERNEL] [    2.866925] usb usb2: Product: DWC OTG Controller

[KERNEL] [    2.866951] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd

[KERNEL] [    2.866981] usb usb2: SerialNumber: usb20_host

[KERNEL] [    2.867238] hub 2-0:1.0: USB hub found

[KERNEL] [    2.867266] hub 2-0:1.0: 1 port detected

[KERNEL] [    2.867593] DWC_OTG: Mode Mismatch Interrupt: currently in Host mode

[KERNEL] [    2.940843] android_usb gadget: Mass Storage Function, version: 2009/09/11

[KERNEL] [    2.940883] android_usb gadget: Number of LUNs=2

[KERNEL] [    2.940919]  lun0: LUN: removable file: (no medium)

[KERNEL] [    2.940945]  lun1: LUN: removable file: (no medium)

[KERNEL] [    2.941128] android_usb gadget: android_usb ready

[KERNEL] [    2.941299] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0

[KERNEL] [    2.941510] usbcore: registered new interface driver xpad

[KERNEL] [    2.941575] usbcore: registered new interface driver usb_acecad

[KERNEL] [    2.941606] acecad: v3.2:USB Acecad Flair tablet driver

[KERNEL] [    2.941656] usbcore: registered new interface driver aiptek

[KERNEL] [    2.941686] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)

[KERNEL] [    2.941726] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen

[KERNEL] [    2.941787] usbcore: registered new interface driver gtco

[KERNEL] [    2.941818] GTCO usb driver version: 2.00.0006

[KERNEL] [    2.941862] usbcore: registered new interface driver hanwang

[KERNEL] [    2.941913] usbcore: registered new interface driver kbtab

[KERNEL] [    2.941942] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver

[KERNEL] [    2.941996] usbcore: registered new interface driver wacom

[KERNEL] [    2.942025] wacom: v1.52:USB Wacom tablet driver

[KERNEL] [    2.942168] ++++++++remotectl_init

[KERNEL] [    2.942212] ++++++++remotectl_probe

[KERNEL] [    2.942246] remotectl probe j=0x0

[KERNEL] [    2.942267] remotectl probe j=0x1

[KERNEL] [    2.942285] remotectl probe j=0x2

[KERNEL] [    2.942304] remotectl probe j=0x3

[KERNEL] [    2.942322] remotectl probe j=0x4

[KERNEL] [    2.942437] input: rkxx-remotectl as /devices/platform/rkxx-remotectl/input/input1

[KERNEL] [    2.945348] rtc_hym8563 1-0051: clock/calendar information is no longer guaranteed

[KERNEL] [    2.950410] using rtc device, rtc_hym8563, for alarms

[KERNEL] [    2.950454] rtc_hym8563 1-0051: rtc core: registered rtc_hym8563 as rtc0

[KERNEL] [    2.950515] i2c /dev entries driver

[KERNEL] [    2.950954] lirc_dev: IR Remote Control driver registered, major 250 

[KERNEL] [    2.950990] IR NEC protocol handler initialized

[KERNEL] [    2.951014] IR RC5(x) protocol handler initialized

[KERNEL] [    2.951039] IR RC6 protocol handler initialized

[KERNEL] [    2.951063] IR JVC protocol handler initialized

[KERNEL] [    2.951087] IR Sony protocol handler initialized

[KERNEL] [    2.951112] IR RC5 (streamzap) protocol handler initialized

[KERNEL] [    2.951140] IR LIRC bridge handler initialized

[KERNEL] [    2.951163] Linux video capture interface: v2.00

[KERNEL] [    2.951330] usbcore: registered new interface driver uvcvideo

[KERNEL] [    2.951360] USB Video Class driver (v1.1.0)

[KERNEL] [    2.951410] def_ref_volt: 1800mV, curr_ref_volt: 1800mV

[KERNEL] [    2.951437] RK29 Watchdog Timer, (c) 2011 Rockchip Electronics

[KERNEL] [    2.951597] rk29-wdt rk29-wdt.0: starting watchdog timer

[KERNEL] [    2.951902] device-mapper: uevent: version 1.0.3

[KERNEL] [    2.952083] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com

[KERNEL] [    2.952213] Bluetooth: HCI UART driver ver 2.2

[KERNEL] [    2.952239] Bluetooth: HCI H4 protocol initialized

[KERNEL] [    2.952266] Bluetooth: HCILL protocol initialized

[KERNEL] [    2.952325] cpuidle: using governor ladder

[KERNEL] [    2.952349] cpuidle: using governor menu

[KERNEL] [    2.997759] 

[KERNEL] [    2.997762] drivers/mmc/core/core.c...1824..  ===== mmc_rescan Begin....[mmc0]

[KERNEL] [    2.997807] 

[KERNEL] [    2.997810] =================

[KERNEL] [    2.997814] mmc_rescan..1831..  ====find no SDMMC host. [mmc0]

[KERNEL] [    2.997896] .Line3978..The End of SDMMC-probe Ver.5.05 The last modify date is 2013-05-08.  [sd_mmc]

[KERNEL] [    2.998049] 

[KERNEL] [    2.998052] drivers/mmc/core/core.c...1824..  ===== mmc_rescan Begin....[mmc1]

[KERNEL] [    2.998116] .Line3978..The End of SDMMC-probe Ver.5.05 The last modify date is 2013-05-08.  [sdio]

[KERNEL] [    2.999274] usbcore: registered new interface driver usbhid

[KERNEL] [    2.999306] usbhid: USB HID core driver

[KERNEL] [    3.016560] rk29_sdmmc_change_clk_div..1961..  newDiv=40, newCLK=300Khz [sdio]

[KERNEL] [    3.066827] logger: created 256K log 'log_main'

[KERNEL] [    3.066907] logger: created 256K log 'log_events'

[KERNEL] [    3.066979] logger: created 256K log 'log_radio'

[KERNEL] [    3.067050] logger: created 256K log 'log_system'

[KERNEL] [    3.067429] i2c-core: driver [RK1000_CODEC] using legacy suspend method

[KERNEL] [    3.067466] i2c-core: driver [RK1000_CODEC] using legacy resume method

[KERNEL] [    3.219163] RK1000_CODEC 4-0060: Failed to add route Left DAC->Left Mixer

[KERNEL] [    3.256569] usb 2-1: new high speed USB device number 2 using usb20_host

[KERNEL] [    3.327854] asoc: rk1000_codec <-> rk29_i2s.1 mapping ok

[KERNEL] [    3.328874] ALSA device list:

[KERNEL] [    3.328924]   #0: RK29_RK1000

[KERNEL] [    3.329150] GACT probability NOT on

[KERNEL] [    3.329208] Mirror/redirect action on

[KERNEL] [    3.329260] u32 classifier

[KERNEL] [    3.329296]     Actions configured

[KERNEL] [    3.329345] Netfilter messages via NETLINK v0.30.

[KERNEL] [    3.329494] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

[KERNEL] [    3.330503] ctnetlink v0.93: registering with nfnetlink.

[KERNEL] [    3.330640] NF_TPROXY: Transparent proxy support initialized, version 4.1.0

[KERNEL] [    3.330724] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.

[KERNEL] [    3.331547] xt_time: kernel timezone is -0000

[KERNEL] [    3.331957] ip_tables: (C) 2000-2006 Netfilter Core Team

[KERNEL] [    3.332389] arp_tables: (C) 2002 David S. Miller

[KERNEL] [    3.332565] TCP cubic registered

[KERNEL] [    3.332612] Initializing XFRM netlink socket

[KERNEL] [    3.333980] NET: Registered protocol family 10

[KERNEL] [    3.335709] Mobile IPv6

[KERNEL] [    3.335816] ip6_tables: (C) 2000-2006 Netfilter Core Team

[KERNEL] [    3.336191] IPv6 over IPv4 tunneling driver

[KERNEL] [    3.338544] NET: Registered protocol family 17

[KERNEL] [    3.338667] NET: Registered protocol family 15

[KERNEL] [    3.386658] Bluetooth: RFCOMM TTY layer initialized

[KERNEL] [    3.386703] Bluetooth: RFCOMM socket layer initialized

[KERNEL] [    3.386740] Bluetooth: RFCOMM ver 1.11

[KERNEL] [    3.386769] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

[KERNEL] [    3.386821] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

[KERNEL] [    3.387043] NET: Registered protocol family 35

[KERNEL] [    3.387167] [BT_RFKILL]: Enter rfkill_rk_init

[KERNEL] [    3.387290] [BT_RFKILL]: Request irq for bt wakeup host

[KERNEL] [    3.387348] [BT_RFKILL]: ** disable irq

[KERNEL] [    3.416559] [BT_RFKILL]: bt shut off power

[KERNEL] [    3.416590] [BT_RFKILL]: ap6330 device registered.

[KERNEL] [    3.436597] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4

[KERNEL] [    3.436673] Registering SWP/SWPB emulation handler

[KERNEL] [    3.437113] ddrfreq: verion 2.4 20130427

[KERNEL] [    3.437154] ddrfreq: normal 600MHz video 300MHz dualview 0MHz idle 0MHz suspend 0MHz reboot 348MHz

[KERNEL] [    3.437536] rk3066b-camera version: v0.2.31  Zoom by ipp

[KERNEL] [    3.438326] ddrfreq: change freq to 600 MHz when normal

[KERNEL] [    3.439699] rtc_hym8563 1-0051: setting system clock to 2011-01-01 12:00:01 UTC (1293883201)

[KERNEL] [    3.442612] asoc: dit-hifi <-> rk-spdif.0 mapping ok

[KERNEL] [    3.443081] usbcore: registered new interface driver snd-usb-audio

[KERNEL] [    3.443295] Freeing init memory: 1068K

[KERNEL] [    3.467126] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101

[KERNEL] [    3.467160] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0

[KERNEL] [    3.467188] usb 2-1: Product: USB 2.0 Hub [MTT]

[KERNEL] [    3.467473] hub 2-1:1.0: USB hub found

[KERNEL] [    3.467614] hub 2-1:1.0: 4 ports detected

[KERNEL] [    3.546567] Probe gc2035_back success

[KERNEL] [    3.575850] gp_rknand_info = : 0xed0e5400

[KERNEL] [    3.576006] request IRQ_NANDC irq , ret=0.........

[KERNEL] [    3.576039] FTL INFO:Version = 438,Date = 20130516

[KERNEL] [    3.576106] FlashCopyProgBuf1=0xc1581000

[KERNEL] [    3.576148] ATime: 40 ns AHB: 140 timming: 1081

[KERNEL] [    3.576172] No.1 FLASH INFO:ad de 94 eb 74

[KERNEL] [    3.576196] No.3 FLASH INFO:ff ff ff ff ff

[KERNEL] [    3.576218] No.4 FLASH INFO:ff ff ff ff ff

[KERNEL] [    3.576651] ATime: 32 ns AHB: 140 timming: 1061

[KERNEL] [    3.576871] ATime: 32 ns AHB: 140 timming: 1061

[KERNEL] [    3.576892] randomizer = 2 , EccBits = 28 pSpec->pReadRetrial = bf00c360

[KERNEL] [    3.662653] totalLogicBlkRaw  = 1898

[KERNEL] [    3.662680] gBootMedia = 1 gSdmmcFwPartOffset =0!

[KERNEL] [    3.662710] rknand_buffer.c version: 4.38 20121130!

[KERNEL] [    3.666613] 10 cmdlinepart partitions found on MTD device rk29xxnand

[KERNEL] [    3.666642] Creating 10 MTD partitions on "rk29xxnand":

[KERNEL] [    3.666668] 0x000000400000-0x000000800000 : "misc"

[KERNEL] [    3.667237] 0x000000800000-0x000001800000 : "kernel"

[KERNEL] [    3.667625] 0x000001800000-0x000002800000 : "boot"

[KERNEL] [    3.668003] 0x000002800000-0x000004000000 : "recovery"

[KERNEL] [    3.668385] 0x000004000000-0x000024000000 : "backup"

[KERNEL] [    3.669058] 0x000024000000-0x00002c000000 : "cache"

[KERNEL] [    3.669498] 0x00002c000000-0x00006c000000 : "userdata"

[KERNEL] [    3.670476] 0x00006c000000-0x00006c400000 : "kpanic"

[KERNEL] [    3.672902] apanic: Bound to mtd partition 'kpanic'

[KERNEL] [    3.672925] apanic: No panic data available

[KERNEL] [    3.672948] 0x00006c400000-0x00008c400000 : "system"

[KERNEL] [    3.673673] 0x00008c400000-0x0001da800000 : "user"

[KERNEL] [    3.677293] startBlk = 160  sysProtAddr = 159 

[KERNEL] [    3.688604] EXT4-fs (mtdblock8): mounted filesystem with ordered data mode. Opts: 

[KERNEL] [    3.692111] 

[KERNEL] [    3.692124] 

[KERNEL] [    3.692134] 

[KERNEL] [    3.746616] usb 2-1.1: new high speed USB device number 3 using usb20_host

[KERNEL] [    3.937367] usb 2-1.1: New USB device found, idVendor=0fe6, idProduct=9800

[KERNEL] [    3.937399] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[KERNEL] [    3.937437] usb 2-1.1: Product: SR9800

[KERNEL] [    3.937455] usb 2-1.1: Manufacturer: Supereal Tech Co

[KERNEL] [    3.937476] usb 2-1.1: SerialNumber: 000001

[KERNEL] [    3.939273] hwghwghwghwghwghwghwghwghwghwghwghwg

[KERNEL] [    4.600486] open /data/misc/wlan_mac failed------------->.

[KERNEL] [    4.600801] CoreChips 2-1.1:1.0: eth0: register 'CoreChips' at usb-usb20_host-1.1, CoreChips SR9800 USB 2.0 Ethernet, 88:88:88:88:88:88

[KERNEL] [    4.676604] usb 2-1.4: new full speed USB device number 4 using usb20_host

[KERNEL] [    4.780252] usb 2-1.4: New USB device found, idVendor=062a, idProduct=4101

[KERNEL] [    4.780287] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[KERNEL] [    4.780327] usb 2-1.4: Product: 2.4G Keyboard Mouse

[KERNEL] [    4.780348] usb 2-1.4: Manufacturer: MOSART Semi.

[KERNEL] [    4.782865] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/platform/usb20_host/usb2/2-1/2-1.4/2-1.4:1.0/input/input2

[KERNEL] [    4.783106] generic-usb 0003:062A:4101.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-usb20_host-1.4/input0

[KERNEL] [    4.787512] input: MOSART Semi. 2.4G Keyboard Mouse as /devices/platform/usb20_host/usb2/2-1/2-1.4/2-1.4:1.1/input/input3

[KERNEL] [    4.787728] generic-usb 0003:062A:4101.0002: input,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-usb20_host-1.4/input1

[KERNEL] [    6.940420] sr9800_reset--------------------------------------->

[KERNEL] [    6.940466] open /data/misc/wlan_mac failed----------------------->.

[KERNEL] [    6.943006] ADDRCONF(NETDEV_UP): eth0: link is not ready

[KERNEL] [    6.961089] lcdc1: dclk:148500000>>fps:60 

[KERNEL] [    6.961122] rk30-lcdc rk30-lcdc.1: rk3188_load_screen for lcdc1 ok!

[KERNEL] [    6.961159] lcdc1 win0 open,atv layer:1

[KERNEL] [    7.070199] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[KERNEL] [    7.071756] CoreChips 2-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x51E1

[KERNEL] [    8.524672] 

[KERNEL] [    8.524689] 

[KERNEL] [    8.524708] 

[KERNEL] [   11.706321] sr9800_reset--------------------------------------->

[KERNEL] [   11.712372] open /data/misc/wlan_mac failed----------------------->.sr9800_reset--------------------------------------->

[KERNEL] [   11.721818] open /data/misc/wlan_mac suceed.open /data/misc/wlan_mac suceed--------------%%%%%%---------->.

[KERNEL] [   14.335064] CoreChips 2-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x51E1

[KERNEL] [   16.637136] CoreChips 2-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x51E1

[KERNEL] [   19.327194] CoreChips 2-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x51E1

[init] Run /sbin/gm.

[init] Ok, PID 90.

[KERNEL] [   20.536292] no layer of lcdc1 is used,go to standby!

[KERNEL] [   20.536315] rk3188 lcdc1 clk disable...

[KERNEL] [   20.536332] lcdc1 win0 closed,atv layer:0

[KERNEL] [   20.538137] rk3188 lcdc1 clk enable...

[KERNEL] [   20.538152] lcdc1: dclk:148500000>>fps:60 

[KERNEL] [   20.538165] rk30-lcdc rk30-lcdc.1: rk3188_load_screen for lcdc1 ok!

[KERNEL] [   20.538178] lcdc1 wakeup from standby!

[KERNEL] [   20.538187] lcdc1 win0 open,atv layer:1

[gm] WTware/RK3066 session manager v.5.3.11.

[gm] TFTP: download file Everyone/list.wtc from 192.168.120.1.

[init] Process pid 70 terminated, status 00000000.

[KERNEL] [   22.271316] CoreChips 2-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x51E1

[gm] It isn't WTware5 TFTP server...

/--- FILE "/tmp/list.wtc" -----------------------

| B8.27.EB.1B.25.D5(Fomina@Fomina)

| B8.27.EB.DC.4A.31(Morozova@Morozova)

| B8.27.EB.DC.4A.31(@Morozova)

| 30.47.35.35.AB.51(Romadova@Romadova_Tronsmart)

| 30.31.e3.1c.2c.9d(@Ira_Tronsmart)

\----------------------------------------------------

[gm] My line in list.wtc: "(Romadova@Romadova_Tronsmart)".

[gm] Set username to Romadova.

[gm] Set hostname to Romadova_Tronsmart.

[gm] TFTP: download file Terminals/30.47.35.35.AB.51/config.wtc from 192.168.120.1.

[gm] tftp error code 1: file not found.

[gm] TFTP: download file Terminals/Romadova_Tronsmart.wtc from 192.168.120.1.

[gm] tftp error code 1: file not found.

[gm] TFTP: download file Terminals/30.47.35.35.AB.51.wtc from 192.168.120.1.

[gm] tftp error code 1: file not found.

[gm] TFTP: download file Terminals/default.wtc from 192.168.120.1.

[gm] tftp error code 1: file not found.

[gm] TFTP: download file Everyone/all.wtc from 192.168.120.1.

/--- FILE "/tmp/all.wtc" -----------------------

| server=192.168.121.2:43389

| sound = on

| sound_level = 100

| smartcard = etoken; ibank2_blue; rutoken

| disk = usb

| turnoffmenu = always

| keyboard = ru

| language = ru, default

| graphic = abcdf

| bpp = 32

| infobox = rctrl

| sleep = 20,standby

| autoshutdown = 45

| vnc = on

\----------------------------------------------------

[gm] TFTP: download file Everyone/wtware.lic from 192.168.120.1.

[KERNEL] [   22.564943] EXT4-fs (mtdblock8): re-mounted. Opts: 

/--- FILE "/etc/config.compiled" -----------------------

| [BOM]

| server=192.168.121.2:43389

| sound=on

| sound_level=100

| smartcard=etoken; ibank2_blue; rutoken

| disk=usb

| turnoffmenu=always

| keyboard=ru

| language=ru, default

| graphic=abcdf

| bpp=32

| infobox=rctrl

| sleep=20,standby

| autoshutdown=45

| vnc=on

| user=Romadova

| connection 

| license_30:47:35:35:ab:51_full = \

|   be4beec56c821672d2cbb2e94e459985007bef6880ef72295ad0ffed7dcf8a70 \

|   c9428861c67923ea2fd723374b48b447126015072cd532da0b23cefb6ceb93cd \

|   865dc67797ffaa0e3fedbd1a06fdf0ab4945872aff285f8eb8946cab8d627233 \

|   9ecc4a8ba4d281fbf8f9185604a9da64925776af65ec9589ecbd8be731aa927d

\----------------------------------------------------

[KERNEL] [   22.668174] EXT4-fs (mtdblock8): re-mounted. Opts: 

[gm] Hostname: "Romadova_Tronsmart".

[gm] Add keyboard event3: MOSART Semi. 2.4G Keyboard Mouse.

[gm] Add keyboard event2: MOSART Semi. 2.4G Keyboard Mouse.

[gm] Add keyboard event1: rkxx-remotectl.

[gm] Add keyboard event0: rk29-keypad.

RSH: listener is active.

Everyone can control terminal by HTTP.

/--- FILE "/proc/asound/devices" -----------------------

|   0: [ 0]   : control

|  16: [ 0- 0]: digital audio playback

|  24: [ 0- 0]: digital audio capture

|  32: [ 1]   : control

|  33:        : timer

|  48: [ 1- 0]: digital audio playback

\----------------------------------------------------

[gm] /dev/snd/controlC1 character device.

[gm] /dev/snd/pcmC1D0p character device.

[gm] /dev/snd/controlC0 character device.

[gm] /dev/snd/pcmC0D0c character device.

[gm] /dev/snd/pcmC0D0p character device.

[gm] /dev/snd/timer character device.

[gm] Run sound daemon.

[init] Run /sbin/rdpsnd 1 0 100 0 -1.

[init] Ok, PID 92.

[rdpsnd] RDP Sound Redirector, WTware v.5.3.11/RK3066.

[init] Run /sbin/rdpdr[scard].

[init] Ok, PID 94.

[gm] Load EXFAT filesystem driver.

[rdpsnd] Card 'RK29RK1000'/'RK29_RK1000'.

[rdpsnd] Mixer name: ''.

[rdpsnd] Components: ''.

[rdpsnd] Controls: 3.

[rdpsnd] ALSA: control 'Capture Volume'.

[rdpsnd] ALSA: control 'Capture Switch'.

[rdpsnd] ALSA: control 'PCM Volume'.

[rdpdr-scard] RDP Smart Card Redirector, WTware v.5.3.11/RK3066.

[gm] insmod /lib/modules/3.0.36+/exfat.ko.

[KERNEL] [   23.626607] exFAT: Version 1.2.9

[init] Run /sbin/resolver 0xc7030 dns [192.168.121.2].

[init] Ok, PID 97.

[gm] Everyone can control terminal by VNC.

[gm] VNC listener at port 5900.

[init] Process pid 97 terminated, status 00000000.

[gm] 192.168.121.2 => 192.168.121.2.

[gm] Free ram before fork terminal client /sbin/rdpclient (session 1): 1872224 Kb.

[init] Run /sbin/rdpclient 1.

[init] Ok, PID 98.

[rdpclient 98] RDP Terminal Client, WTware v.5.3.11/RK3066, pipe 1, pid 98.

[rdpclient 98] Add smartcard redirection.

[rdpdr-scard] New client connection, id 1.

[rdpclient 98] Redirect sound.

[rdpclient 98] Make RDP session with 192.168.121.2, port 43389.

[rdpclient 98]  Username: "Romadova".

[rdpclient 98]  No password.

[rdpclient 98]  No PIN.

[rdpclient 98]  No domain.

[rdpclient 98]  No shell.

[rdpclient 98]  No directory.

[rdpclient 98]  Window: 1920x1080@16.

[rdpclient 98]  PFlags 0x000000A0.

[rdpclient 98]  Keyboard 00000419:00000000.

[rdpclient 98]  My hostname "Romadova_Tronsmart".

[rdpclient 98] TCP: connecting to 192.168.121.2:43389.

[rdpclient 98] TCP: connection with 192.168.121.2:43389 established.

[rdpclient 98] Turn keepalive on.

[rdpclient 98] Free ram after buffers allocation: 1871480 KB.

[gm] /graphic/ppllg.png: 32x38.

[KERNEL] [   35.199193] CoreChips 2-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x51E1

[rdpclient 98] Reconnect with CredSSP enabled.

[rdpclient 98] TCP: reconnecting to 192.168.121.2:43389.

[rdpclient 98] TCP: connection with 192.168.121.2:43389 established.

[rdpclient 98] Turn keepalive on.

[rdpclient 98] CredSSP.

[rdpclient 98] RDP5 encryption (X.509).

[rdpclient 98] LOGON_EX_LOGONERRORS 0xfffffffe 0x00000005.

[rdpdr-scard] Reset client 1.

[rdpclient 98] SessionId 0x00000005: DROFA\Romadova.

[KERNEL] [  845.536759] usb 2-1.3: new high speed USB device number 5 using usb20_host

[KERNEL] [  845.638993] usb 2-1.3: New USB device found, idVendor=058f, idProduct=6387

[KERNEL] [  845.639011] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[KERNEL] [  845.639026] usb 2-1.3: Product: Mass Storage Device

[KERNEL] [  845.639038] usb 2-1.3: Manufacturer: JetFlash

[KERNEL] [  845.639048] usb 2-1.3: SerialNumber: E0ONKWCJ

[KERNEL] [  845.640032] scsi0 : usb-storage 2-1.3:1.0

[KERNEL] [  846.637833] scsi 0:0:0:0: Direct-Access     JetFlash TS4GJFV60        8.07 PQ: 0 ANSI: 2

[KERNEL] [  846.643038] sd 0:0:0:0: [sda] 8011776 512-byte logical blocks: (4.10 GB/3.82 GiB)

[KERNEL] [  846.643530] sd 0:0:0:0: [sda] Write Protect is off

[KERNEL] [  846.643551] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00

[KERNEL] [  846.644009] sd 0:0:0:0: [sda] No Caching mode page present

[KERNEL] [  846.644023] sd 0:0:0:0: [sda] Assuming drive cache: write through

[KERNEL] [  846.646756] sd 0:0:0:0: [sda] No Caching mode page present

[KERNEL] [  846.646770] sd 0:0:0:0: [sda] Assuming drive cache: write through

[KERNEL] [  847.688854]  sda: sda1

[KERNEL] [  847.693515] sd 0:0:0:0: [sda] No Caching mode page present

[KERNEL] [  847.693572] sd 0:0:0:0: [sda] Assuming drive cache: write through

[KERNEL] [  847.693637] sd 0:0:0:0: [sda] Attached SCSI removable disk

[hpsc] Filesystem signature not found at /dev/sda.

[hpsc] 00000000:fab800008ed0bc007c8bf45007501ffbfcbf0006b90001f3a5ea1e060000bebe  ........|..P.P................

[hpsc] 00000020:07803c807402cd18565306bb007cb90100ba0000b80102cd13075b5eb280720b  ..<.t..VS...|...........[^..r.

[hpsc] 00000040:bfbc7d813d55537502b200bfeb0688158a74018b4c028beeeb15be9b06ac3c00  ..}.=USu........t..L........<.

[hpsc] 00000060:740b56bb0700b40ecd105eebf0ebfebb007cb80102cd137305beb306ebdfbed2  t.V......^......|....s........

[hpsc] Success: USB1p1 mounted VFAT r/w.

[rdpclient 98] Announce new disk named USB1 at /mnt/usb-rdp/1, r/w.

[gm] [VNC] Connection from 192.168.2.25.

[gm] [VNC] Client VNC version 8 (RFB 003.008).

[gm] [VNC] Empty password. Unsecure!

[gm] [VNC] 12 encodings.

[gm] [VNC] Encoding 16.

[gm] [VNC] Encoding 1.

[gm] [VNC] Encoding 22.

[gm] [VNC] Encoding 21.

[gm] [VNC] Encoding 15.

[gm] [VNC] Encoding 6.

[gm] [VNC] Encoding 5.

[gm] [VNC] Encoding 2.

[gm] [VNC] Encoding 0.

[gm] [VNC] Encoding -314.

[gm] [VNC] Encoding -239.

[gm] [VNC] Encoding -223.

[gm] [VNC] bits-per-pixel 8, depth 8, big-endian false, true-colour false.

[gm] [VNC] red-max 0x0000, green-max 0x0000, blue-max 0x0000.

[gm] [VNC] red-shift 0, green-shift 0, blue-shift 0.

[gm] [VNC] WTware DOES NOT support 8 bit color. Use 16, 24 or 32 bit color.

[gm] [VNC] 12 encodings.

[gm] [VNC] Encoding 0.

[gm] [VNC] Encoding 1.

[gm] [VNC] Encoding 22.

[gm] [VNC] Encoding 21.

[gm] [VNC] Encoding 16.

[gm] [VNC] Encoding 15.

[gm] [VNC] Encoding 6.

[gm] [VNC] Encoding 5.

[gm] [VNC] Encoding 2.

[gm] [VNC] Encoding -314.

[gm] [VNC] Encoding -239.

[gm] [VNC] Encoding -223.

[gm] [VNC] 12 encodings.

[gm] [VNC] Encoding 16.

[gm] [VNC] Encoding 1.

[gm] [VNC] Encoding 22.

[gm] [VNC] Encoding 21.

[gm] [VNC] Encoding 15.

[gm] [VNC] Encoding 6.

[gm] [VNC] Encoding 5.

[gm] [VNC] Encoding 2.

[gm] [VNC] Encoding 0.

[gm] [VNC] Encoding -314.

[gm] [VNC] Encoding -239.

[gm] [VNC] Encoding -223.

[gm] Close TCP connection while receiving data, errno 104.

[gm] [VNC] Close connection.

[gm] [VNC] Connection from 192.168.2.25.

[gm] [VNC] Client VNC version 8 (RFB 003.008).

[gm] [VNC] Empty password. Unsecure!

[gm] [VNC] 12 encodings.

[gm] [VNC] Encoding 16.

[gm] [VNC] Encoding 1.

[gm] [VNC] Encoding 22.

[gm] [VNC] Encoding 21.

[gm] [VNC] Encoding 15.

[gm] [VNC] Encoding 6.

[gm] [VNC] Encoding 5.

[gm] [VNC] Encoding 2.

[gm] [VNC] Encoding 0.

[gm] [VNC] Encoding -314.

[gm] [VNC] Encoding -239.

[gm] [VNC] Encoding -223.

[gm] [VNC] bits-per-pixel 8, depth 8, big-endian false, true-colour false.

[gm] [VNC] red-max 0x0000, green-max 0x0000, blue-max 0x0000.

[gm] [VNC] red-shift 0, green-shift 0, blue-shift 0.

[gm] [VNC] WTware DOES NOT support 8 bit color. Use 16, 24 or 32 bit color.

[gm] [VNC] 12 encodings.

[gm] [VNC] Encoding 0.

[gm] [VNC] Encoding 1.

[gm] [VNC] Encoding 22.

[gm] [VNC] Encoding 21.

[gm] [VNC] Encoding 16.

[gm] [VNC] Encoding 15.

[gm] [VNC] Encoding 6.

[gm] [VNC] Encoding 5.

[gm] [VNC] Encoding 2.

[gm] [VNC] Encoding -314.

[gm] [VNC] Encoding -239.

[gm] [VNC] Encoding -223.

[gm] [VNC] 12 encodings.

[gm] [VNC] Encoding 16.

[gm] [VNC] Encoding 1.

[gm] [VNC] Encoding 22.

[gm] [VNC] Encoding 21.

[gm] [VNC] Encoding 15.

[gm] [VNC] Encoding 6.

[gm] [VNC] Encoding 5.

[gm] [VNC] Encoding 2.

[gm] [VNC] Encoding 0.

[gm] [VNC] Encoding -314.

[gm] [VNC] Encoding -239.

[gm] [VNC] Encoding -223.

[gm] [VNC] Close connection.
Home WTware diskless client.